|
|
|
|
|
|
|
|
|
|
Campagnolo 11 Speed chain tool clamping pin: Replacement clamping pin for the UT-CN300
|
Lezyne Chain Drive Tool: Quality materials & contoured design make this tool suitable for the shop and home. 9/10 Speed Compatible. Replaceable breaker pin is designed for 9/10 speed chain pins. Spare pin included. Versatile Tool.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lezyne 11spd Chain Drive Tool: Forged steel body is CNC-machined and contoured for improved ergonomics. Replaceable breaker pin and backing bolt made of hardened steel. Designed for flaring 11spd chain pins; spare pin included.
|
Park Tool CT-3 Screw Type Chain Tool: Because of the tremendous force needed to remove chain pins, our Screw Type Chain Tool is made from investment cast steel. Along with superior strength and durability
|
|
|
|
|
|
|
|
|
|
|
|
|
Park Tool CT-5 Mini Chain Brute Chain Tool: This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special “V”- shaped handle, and super strong replaceable pin make chain removal and installation a breeze.
|
Park Tool CC-2 Chain Checker Gauge: Measures chain-pin distance for stretch/wear. Calibrated gauge and windowed arm provide readings...
|
|
|
|
|
|
|
|
|
|
|
|
|
Park Tool Chain Tool Pin: Replacement hardened alloy steel chain tool pin for the CT-1, CT-2, or CT-3 chain tools.
|
Park Tool CT-2 Plier Type Chain Tool: The CT-2 is designed for fast, easy removal or repair of chains. The tremendous leverage generated removes even the toughest rivets. To use, simply put the chain roller in the built-in recess and squeeze the handles...
|
|
|
|
|
|
|
|
|
|
|
|
|
Park Tool CC-3 Chain Wear Indicator: A worn chain shifts poorly and wears sprockets at an accelerated rate. The CC-3 is a "go, no go" gauge designed to accurately indicate when a chain reaches .75% and 1% wear, the points...
|
Park Tool CT-4.2 Master Chain Tool: The CT-4.2 Master Chain Tool replaces the CT-4 Master Chain Tool. The CT-4.2 will work with “hour-glass” shaped 8, 9, 10 and 11 speed chains. Also fits the asymmetrical Shimano chain designs such as Dura-Ace 7900...
|
|
|
|
|
|
|
|
|
|
|
|
|
Park Tool CT-11 Rivet Peening Tool for Campagnolo 11-speed chain: After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deformed" to...
|
Park Tool MLP-1 Master Link Pliers: Many derailleur chains use a “master link” that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make
|
|
|
|
|
|
|
|
|
|
|
|
|
Park Tool CTP Chain Tool Replacement Pins: Park Chain Tool Pin for CT2, CT-3, CT-5 & CT-7, Card of 2
|
Park Tool CTP-4K Replacement Pin Kit: The CTP-4K includes four (4) replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to loose the ball bearing beneath the pin...
|
|
|
|
|
|
|
|
|
|
|
|
|
Park Tool CT-7 Screw Type BMX Chain Tool: The CT-7 Chain Tool is specifically designed to work on wide and tall 3/16” BMX/freestyle chains. The CT-7 also works on 1/8” BMX/freestyle chains with outer plate width 7.4mm or more...
|
Pedros Vise Whip: Heat treated vise grip style chain whip tool with locking non slip jaws. Fits cogs between 11t and 23t (not designed for 1/8" chains)...
|
|
|
