 |
 |
 |
|
Marin Alpine Trail E1 Mountain E-Bike: The Alpine Trail E will take you further, faster, allowing you to tackle the most aggressive trails either up or down.
We didn’t just add a battery, motor, controller to the Alpine Trail and call it a day. The Alpine Trail E was designed as a whole system, with everything from the frame to drivetrain to the individual components being individually selected to give the rider the best eMTB experience available.
Shimano’s STEPS system is both powerful and lightweight, with the mid-drive motor down low to help ensure that the Alpine Trail E performs like the analog version, but with a 250W boost. Three levels of power give riders options to balance electric power, speed and range. Electric assist up to 20mph in the US, 25km/h in Europe.
The electric features are built in, with an integrated and removable downtube battery, top tube power button, and side charging port encased in the forged motor cradle.
The full Shimano STEPS system comes with the peace of- mind that only a technology leader like Shimano can provide. With years of expertise, our customers can rest assured that they have some of the best global support available to them.
WHEEL SIZE: 29” FRONT / 27.5” REAR
SIZE RANGE: S, M, L, XL
SUSPENSION: 160/150mm
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- FRAME
- All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
- FORK
- Rock Shock 35 Gold RL 29", Motion Control Damper, 160mm Travel, Maxle Stealth Axle, 44mm Offset
- SHOCK
- Rock Shock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300lb, L/XL Spring Rate = 400lb
- RIMS
- Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
- HUB REAR
- Shimano HB-MT400B, 148x12mm, Centerlock, Standard Freehub Body
- HUB FRONT
- Shimano MT-410B, 110x15mm, Centerlock Disc, 32H
- SPOKES
- 14g Black Stainless Steel
- TIRES
- Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, Double Down, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8, 3C Maxx Terra, EXO+, Tubeless Compatible
- DERAILLEUR REAR
- Shimano Deore 5100 Direct Attachment, 10-Speed
- DERAILLEUR FRONT
- -
- SHIFT LEVER
- Shimano Deore M4100-R, I-Spec EV, 10-Speed
- CRANKSET
- Marin Forged Alloy 165mm Length, Narrow Wide 38T Chainring, e13 Plus Chain guide, Aluminum Plate
- MOTOR
- Shimano STEPS E7000, 250W, 60Nm
- CHAIN
- KMC X-10E, E-Bike Specific, Silver
- CASSETTE
- Shimano Deore M4100-10 10-speed 11-46T
- BRAKES FRONT
- Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor
- BRAKES REAR
- Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor w/ Speed Sensor
- BRAKE LEVERS
- Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible
- HANDLEBAR
- Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
- STEM
- Marin 3D Forged Alloy, 35mm
- GRIPS
- Marin Single Clamp Locking
- HEADSET
- FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
- SEATPOST
- TranzX, YSP23JL, 1x Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm
- SADDLE
- Marin E-MTB Saddle
- PEDALS
- Marin MTB Plastic
- BATTERY
- BT-8035, Internal 504Wh
- DISPLAY
- SC-E7000 Display
- SWITCH
- SW-E7000 Left Hand Switch for Assist Mode Change
- EXTRAS
- Shimano Battery Charger EC-E6002, Bolt-on Thru-Axle
- -
- Note: We do a professional assembly before we box to ship your new bicycle. Then we have to break down just enough to fit in the shipping box. You will only have to install the seat post, front wheel and fasten stem over the steer tube of the fork.
|
|
|
|
|
|
|
