 |
 |
 |
|
Intense Tracer S Enduro Bike: The "S" model designation is given to a build/model that pushes the limits of that segment. The new Tracer S model pushes the limits of Enduro/Freeride with a top-spec Ohlins suspension platform, DH casing tires, and powerful Magura MT7 Pro brakeset.
TRAVEL (FRONT/REAR): 170MM/170MM
WHEEL SIZE: 29" Front 27.5" Rear
BUILD WEIGHT: (Size Medium Tubeless) 34 lbs 2 oz
HT ANGLE: 64.5 ̊ High Setting/ 64 ̊ Lower Setting
REACH: 425MM / 16.7" (Small) // 455MM / 17.9" (Medium) // 480MM / 18.9" (Large) // 505MM / 19.9" (Extra Large)
Borrowing design inspiration and technology from our M29 downhill bike, utilizing its bottom link driven rear shock and suspension design, we have created a bike with plush travel for the roughest of descents, and a firm pedal platform when needed. We’ve positioned the rear shock low down and centered in the frame, allowing the Tracer to descend and handle terrain impeccably.
The Tracer S has been designed around a staggered wheelset. Taking what we've learned from our staggered wheel Tazer, we've found a great balance of agility and stability. When the trails get tight or you're looking to shave time off of race stages, the new Tracer is ready.
IN FRAME CHAD STORAGE SYSTEM.
The Chad Storage System is an on-bike storage solution system that is being introduced on the Tracer. This system is not one individual part, but a concept for storage solutions that will continue to evolve with INTENSE models. The system is named in memory of our late colleague and bike fanatic, Chad Peterson.
The Tracer has a compartment located in the frame's downtube under the bottom bracket where a specially designed Chad System storage bag can hold your tubes, tools, and other trailside repair solutions. In addition to the storage bag that is included with your Tracer, a Chad System storage box will also be available to purchase separately. This semi-hard case box will neatly house your multi-tools, CO2 cartridges, and other trailside repair solutions.
THE JS TUNED ENDURO LINK.
We talk a lot about JS Tuned here at INTENSE. JS stands for Jeff Steber (our founder and CEO) and simply put it is a system that focuses on all of the individual parts that make up one of our bikes: from suspension, geometry, wheel size, materials and component spec. The key element of JS Tuned is our suspension system that uses two counter-rotating links to connect the front and rear triangles of the bike. The links are specifically placed to allow for separation between the pedaling and braking forces from the suspension performance. Every model in our range has its own personal and specific JS tune.
FLIP CHIP GEOMETRY ADJUSTMENT.
The INTENSE Tracer 279 has a ‘Flip Chip’ feature which allows you to alter the geometry of your bike between two positions. The bike comes from our factory in the HI (High) setting. The HI setting is engineered to perform the best in the roughest and most technical terrain. The LO setting is engineered to perform the best in slightly smoother, high speed trails such as what could be found in many bike parks. The LO setting will slacken the head angle a little, lower the bottom bracket and standover, shorten the reach by 5mm, creating slightly firmer suspension.. What position you have the Flip Chip in comes down to personal preference, riding style and the type of terrain you normally ride on.
The Flip Chip on the INTENSE Tracer 279 is located on the Lower Link of the suspension system where it bolts onto the rear shock. With the bike fully built the Flip Chips are hidden, so in order to gain access to them you will need a 5mm Allen key and a torque wrench. The basic process involves removing the rear wheel, unbolting the Rear Triangle from the Top Link, which will then give you access to the Bottom Link and the Flip Chips.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- FRAME Full carbon fiber front and rear triangle utilizing an optimized carbon layup for the ENDURO category. Features fully guided internal cable routing, carbon top link, titanium hardware, ISCG-05 tabs, threaded BB an updated molded frame protection and shuttle guard. Concentric bottom link with integrated flip chip to adjust GEO. Integrated flip chip to adjust GEO. Integrated CHAD Storage system with the 'tube bag' included. 170mm of rear wheel travel. Quick release rear axle (148mm boost hub spacing).
- FORK Öhlins RXF 38, 170mm, dual air spring, compression and rebound adjustment, solid front axle with pinch bolt (110mm boost spacing) 44mm offset.
- SHOCK
- Öhlins TTX22M Coil, 170mm of travel, 3 position high speed compression, low speed compression and rebound adjustment Shock size/Stroke: 205mm x 65mm upper Trunnion mount, Lower Mounting Hardware: 8mm x 20mm.
- COIL/SPRING
- 365 lbs (S Size for 54 - 64 kg rider weight) / 457 lbs (M Size for 64 - 73 kg rider weight) / 502 lbs (L Size for 73 - 80 kg rider weight) / 548 lbs (XL Size for 80 - 84 kgs rider weight).
- WHEELS e*Thirteen LG1 Enduro 30mm Alloy Rim / e*Thirteen hub/boost
- HUBS Front updated e*Thirteen race hub 28h 6-bolt rotor 110mm x 15mm boost front / rear updated e*Thirteen race hub 28h 6-bolt rotor XG driver body, 148mm x 12mm boost
- RIMS e*Thirteen LG1 Enduro 30mm alloy rim 28h
- SPOKES Hive triple-butted black steel spokes
- TIRES
- Front: MAXXIS Assegai WT Maxx Terra 3C MaxxGrip DH 29" X 2.50" / Rear: MAXXIS Assegai WT Maxx Terra 3C MaxxGrip DH 27.5" X 2.50"
- SHIFTERS SRAM GX Eagle 12SP
- REAR DERAILLEUR SRAM X01 Eagle 12SP
- CRANK SRAM X1 Eagle Alloy 12SP / DUB / 30t / 170mm / Boost / 52mm Chainline
- CASSETTE SRAM XG 1275 Eagle 12SP. 10-52t
- CHAIN SRAM GX Eagle 12SP 118 links
- CHAIN GUIDE e*Thirteen Vario top guide w/mini slider
- BOTTOM BRACKET SRAM DUB Threaded
- SADDLE SDG Radar LUX-Alloy Rails
- SEATPOST e*Thirteen Infinite Dropper I-Spec, 150mm SM / 180mm MD-LG / 210mm XL
- HANDLEBAR Renthal Fatbar Alloy 35mm, 30mm rise / 800mm
- STEM INTENSE Recon 35mm / 40mm length
- HEADSET Cane Creek 40 Top ZS49/28.6mm, Bottom ZS56/40
- BRAKESET Magura MT7 Pro, 4-Piston caliper - Front Rotor Magura Storm HC - 203mm 6-Bolt / Rear Rotor Magura Storm HC - 203mm 6-Bolt
- GRIPS INTENSE Logo Lock-on
|
|
|
|
|
|
|
