 |
 |
 |
|
Marin Alpine Trail E2 Mountain E-Bike: The Alpine Trail E will take you further, faster, allowing you to tackle the most aggressive trails either up or down.
We didn’t just add a battery, motor, controller to the Alpine Trail and call it a day. The Alpine Trail E was designed as a whole system, with everything from the frame to drivetrain to the individual components being individually selected to give the rider the best eMTB experience available.
Shimano’s STEPS system is both powerful and lightweight, with the mid-drive motor down low to help ensure that the Alpine Trail E performs like the analog version, but with a 250W boost. Three levels of power give riders options to balance electric power, speed and range. Electric assist up to 20mph in the US, 25km/h in Europe.
The electric features are built in, with an integrated and removable downtube battery, top tube power button, and side charging port encased in the forged motor cradle.
The full Shimano STEPS system comes with the peace of- mind that only a technology leader like Shimano can provide. With years of expertise, our customers can rest assured that they have some of the best global support available to them.
WHEEL SIZE: 29” FRONT / 27.5” REAR
SIZE RANGE: S, M, L, XL
SUSPENSION: 160/150mm
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- FRAME
- All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
- FORK
- Fox 38 Performance Elite, 160mm travel, 29" , 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender
- SHOCK
- Fox Float DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205x65mm, Trunnion Upper Mount, 25mmxM8 Lower Mount, S/M Spring = 350lb, L/XL Spring = 450lb
- RIMS
- Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width; Pinned Joint, Disc Specific, Tubeless Compatible
- HUB REAR
- Shimano HB-MT510B, 148x12mm, Centerlock, Microspline Freehub Body
- HUB FRONT
- Shimano MT-410B, 110x15mm, Centerlock Disc, 32H
- SPOKES
- 14g Black Stainless Steel
- TIRES
- Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, EXO+, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8”, 3C Maxx Terra, EXO+, Tubeless Compatible
- DERAILLEUR REAR
- Shimano XT 8100 12-Speed, SGS
- DERAILLEUR FRONT
- -
- SHIFT LEVER
- Shimano SLX 7100 12-Speed, I-Spec EV
- CRANKSET
- e13 e*Spec Plus Crank, 165mm Length with e13 e*Spec DM Chainring 38T, e13 Plus Chainguide, Aluminum Plate
- MOTOR
- Shimano STEPS EP8 Drive Unit, 250W, 85Nm
- CHAIN
- KMC E12S, E-Bike Specific Chain
- CASSETTE
- Shimano SLX M7100, 12-Speed, 10-51T
- BRAKES FRONT
- Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor
- BRAKES REAR
- Shimano SLX 4-Piston Hydraulic Disc, 203mm Rotor w/ Speed Sensor
- BRAKE LEVERS
- Shimano SLX Levers, I-Spec EV
- HANDLEBAR
- Deity Ridgeline, Stealth Finish, 35mm Clamp, 800mm Width
- STEM
- Deity Copperhead 35mm, Black Ano
- GRIPS
- Marin Single Clamp Locking
- HEADSET
- FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
- SEATPOST
- X-Fusion Manic, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm
- SADDLE
- Marin E-MTB Saddle
- PEDALS
- Marin MTB Plastic
- BATTERY
- BT-8036, Internal 630Wh
- DISPLAY
- SC-E8000 Display
- SWITCH
- SW-E7000 Left Hand Switch for Assist Mode Change
- EXTRAS
- Shimano Left Hand Switch for Assist Mode Change, Shimano Battery Charger EC-E6002, Bolt-on Thru-Axle
- -
- Note: We do a professional assembly before we box to ship your new bicycle. Then we have to break down just enough to fit in the shipping box. You will only have to install the seat post, front wheel and fasten stem over the steer tube of the fork.
|
|
|
|
|
|
|
