![](/v/vspfiles/templates/BikeBling18/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/BikeBling18/images/clear1x1.gif) |
![](/v/vspfiles/templates/BikeBling18/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/BikeBling18/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/BikeBling18/images/clear1x1.gif) |
![](/v/vspfiles/templates/BikeBling18/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/BikeBling18/images/clear1x1.gif) |
Specs & Information
- Application:
- Apply liberally to the cassette while cycling the chain backwards, building up a thick layer of foam.
- Apply directly to any other areas not already coated such as crank arms, derailleur bodies or jockey wheels.
- If you have a bike stand, run through all of your gears several times to agitate the grime.
- Agitate any stubborn areas where needed then leave to soak for two minutes.
- Rinse off thoroughly with clean water.
- Dry the chain using a clean cloth.
- Apply Peaty's LinkLube
|
|
![](/v/vspfiles/templates/BikeBling18/images/clear1x1.gif) |
![](/v/vspfiles/templates/BikeBling18/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/BikeBling18/images/clear1x1.gif) |
![](/v/vspfiles/templates/BikeBling18/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/BikeBling18/images/clear1x1.gif)
|