 |
 |
 |
 |
|
 |
|
Specs & Information
- Fitting instructions:
- Remove tyre and any old rim tape
- Clean and degrease rim thoroughly
- Ensure rim is completely dry before application
- Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
- Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
- Use a small spike to pierce the tape in the centre of the valve hole
- Remove dust cap and Push valve through the valve hole
- Apply lock ring tightly by hand, ensuring there are no air gaps
- Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre
- Ride!
|
|
|
|
|
|
|
