 |
 |
 |
|
SE Bikes Dblocks Big Ripper 29" Blue Gold Camo: Blue & gold never looked so good! The Blue Gold Camo Dblocks Big Ripper is the signature ride of the king of the streets, Darnell Meyers, aka Dblocks. It’s been designed and spec’d with specific parts that Dblocks chose, such as the camo frame & fork, Freedom ThickSlick tires, Power Wing cruiser bars, and New York Flyer seat. If you want to stand out in the crowd, this is your bike.
- Retro 6061 aluminum Big Ripper frame with Floval tubing, looptail rear end, American bottom bracket, and classic PK Ripper wishbone plate
- Full Cr-Landing Gear forks
- Cr-Mo Power Wing cruiser bars
- Double-wall rims with sealed bearing high-flange hubs
- SE 3-piece V-Ridge cranks with alloy SE sprocket
- Authentic ODI Mushroom II grips
- Freedom ThickSlick Comp 29” x 2.10” tires
- New York Flyer Seat with super grippy top cover and bottle opener
- SE Wheelie Pegs
- 30.5pounds
- Top Tube, Actual 23.6"
- Seat Tube, Center To Top 16.9"
- Seat Tube Angle 71°
- Head Tube Angle 71°
- Chainstay Length 18.25"
- Wheelbase 44"
- Bottom Bracket Height 12.25"
- Standover 30.75"
- Suggested Rider Size 5'5"+ (165cm+)
- Stem 55mm
- Handlebar Width 29"
- Crank 175mm
- Wheel Size 29"
- Seat Post Diameter 27.2mm
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Specs & Information
- Suggested Rider Size 5'5"+ (165cm+)
- Frame Dblocks Wheelie King Model, 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
- Fork Landing Gear, Full Cr-Mo
- Crankset SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36T Alloy SE Racing Sprocket
- Pedals X-Pedo Low-profile Platform w/ Removable Pins
- Chain KMC S1
- Wheelset Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 17T Freewheel, Stainless Spokes
- Tires Freedom ThickSlick Comp, 29" x 2.10" Front & Rear
- Brakeset Tektro 855AL V-Brake, Linear Cable
- Brake Levers Tektro 316A, 2-Finger Alloy
- Headset Tange 1-1/8" Threadless
- Handlebar Cr-Mo Power Wing Cruiser Bar, 28" x 7", 10° Backsweep, 1° Upsweep
- Stem Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
- Grips Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA
- Seat Raise It Up Flyer Seat w/ Custom SE Bottle Opener Brace
- Seatpost SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
- Seat Clamp Alloy, 31.8mm Inner Diameter
- Accessories Alloy Valve Caps, SE Wheelie Pegs
- Weight 30.5 lbs / 13.83 kgs
|
|
|
|
|
|
|
